A microcement floor creates a continuous base without a repeated board, tile or stone pattern. Its performance starts below the visible surface, so stability, moisture, floor levels and joints matter as much as colour and texture.
Microcement can work well on new and renovated floors when the base is suitable and the system matches the expected traffic, cleaning and daily use.
Start with the floor that already exists. Check that the base is sound, flat, clean and stable. Cracks, moisture and movement also need review. Problems below can become visible above if preparation is treated as a quick cosmetic step. Do not simply cover existing movement joints. Also check why a crack formed. An old stable crack and an actively moving crack need different solutions.
Plan the thresholds. Plan door clearances, skirtings, stair edges, drains and connections to timber, stone or tile early. Microcement is relatively thin, but the final floor height must also include any repair or levelling below it. Applying over an existing floor can reduce demolition and disruption. However, weak or damaged layers still need to be removed. A thin new finish should not cover a failed base.
Finish follows use. Foot traffic, sand, chairs, pets, wet shoes and cleaning all affect the right finish and protection. A bedroom and a busy public reception may use the same colour but need different systems. Every hand-applied floor has some natural variation. A larger sample and completed project photos help show how much colour movement and texture to expect.
Care is part of the specification. Routine dust removal limits abrasion from grit. Spills should be cleared promptly, furniture should be moved with protection, and aggressive or abrasive cleaners should be avoided unless the installed-system guidance says otherwise. Protective coats still need care. The right time for inspection or renewal depends on the use, traffic and sealer, so follow the guidance provided for the installed system.